In the Past post I showed you the parts you will need, So here are the Pictures of how I did it.
I got this piece...
Then I cut off the mini male side of the cable, Leaving the female micro usb.
Then I measured the case and
how much cable I would need for this cable,
and cut the excess off.
Soldering Time!
Here is the Layout
Make sure to cut your heat shrink and put it BELOW where you are soldering,
on the wire BEFORE you start soldering
So here is the pictures of me hooking it up to the lapdeck and booting a couple OS's
Here is the Final Product!
This is my second time doing this, and in the future,
I'll be ether making a case that snaps on
or another type of cable management.
